East Peckham Primary School
This Oxford lean-to was installed with minimum columns to exceed the decking outside the early year’s classroom to protect the young children for the weather as they like to use this area all year round.
- Shape: Curved Lean-to
- Support: Free Standing
- Hoop Style: Lattice
- Cladding Type: Fabric
- Location: London
Frequently Asked Questions
- Will our concerns over children and staff safety be addressed prior to installation?
We have been working within schools for many years. All contractors are Clovis approved and CRB checked. Full risk assessments are carried out prior to starting installation taking into consideration your requirements and safety fencing is erected wherever needed at no additional charge.
- Do you fix your canopies directly onto tarmac?
No, all canopies are fixed on to concrete pads or bases as the structures can lift out from the ground if not fixed into a suitable concrete base due to the uplift created by wind acting on the roof area.
- What are Building Regulations and will they affect me?
In relation to our canopies Building Regulations specify the standard to which they should be built i.e. strength, fire rating of materials etc. Again it is advisable to contact your local Building Control officer(s), as a rule of thumb any canopy over 30m2 will require conformity to building regulations and an application will need to be made although this figure can be lower. Most of our structures are supplied conforming to the requirements for these regulations as standard and generic sets of structural calculations can be supplied free of charge to demonstrate to Building Control the integrity of the proposed structure and foundations.
- Do you use Polycarbonate, PETG, GRP or Acrylic for non fabric cladding?
At Clovis Canopies we use polycarbonate roofing as although slightly more expensive, we find it has a better combination of strength, impact resistance, sheet size and colour, fire / flame resistance and longevity of life than any of the other above mentioned cheaper materials.
We'd love to hear from you