NNR Building – Entrance Canopy
This polycarbonate entrance canopy 2m x 1m has been designed and fabricated to cantilever out directly from the building. Creating a focal point for these newly refurbished offices.
- Support: Building Supported Cantilever
- Cladding Type: Polycarbonate
- Location: Feltham
Frequently Asked Questions
- Will there be any additional hidden charges to the quotation?
No, our prices are all inclusive.
- Are your canopies usable all year in all weathers?
Yes unlike some solutions that need to be taken down in the winter or during high winds our canopies are designed to be useable all year round. The cladding materials as well as providing shade are also waterproof so that they can be used during wet weather.
- Do you use Polycarbonate, PETG, GRP or Acrylic for non fabric cladding?
At Clovis Canopies we use polycarbonate roofing as although slightly more expensive, we find it has a better combination of strength, impact resistance, sheet size and colour, fire / flame resistance and longevity of life than any of the other above mentioned cheaper materials.
- How is the polycarbonate sheeting attached to the framework?
We use a two part glazing bar on our canopies with rubber gasket or cushions to attach the roof polycarbonate sheets as this allows for the expansion of the sheets as the weather heats up or cools down. The rubber gaskets as well as creating a watertight seal greatly reduce noise levels as the sheets expand and contract. We do not screw sheets directly to the framework as this can lead to the roofing sheets buckling and potentially causing leaks due to the possibility of screw heads popping off. In addition to this we never lap one sheet over the other as this can result in an algae build-up resulting in unsightly discoloured patches in the roof.
We'd love to hear from you