Robin Pinto Unit, Luton & Dunstable Hospital – Entrance Canopy
A wall mounted cantilevered entrance canopy Clean, sharp arch in 6mm clear or opaque polycarbonate, for good light levels. Variety of sizes to suit all needs, whether residential, industrial or bespoke.
- Shape: Curved Barrel Vault
- Support: Building Supported Cantilever
- Hoop Style: Single Box
- Cladding Type: Polycarbonate
- Location: Luton, Bedfordshire
Frequently Asked Questions
- Are your canopies usable all year in all weathers?
Yes unlike some solutions that need to be taken down in the winter or during high winds our canopies are designed to be useable all year round. The cladding materials as well as providing shade are also waterproof so that they can be used during wet weather.
- Can we view existing canopies, so that we know what we are buying?
If you are considering purchasing a canopy from any company, it is in fact strongly recommended that you visit an existing installation to see exactly what you are paying for. At Clovis Canopies we are proud of our work and are happy to arrange (with the clients consent) for you to view examples of our work and structures.
- Do you fix your canopies directly onto tarmac?
No, all canopies are fixed on to concrete pads or bases as the structures can lift out from the ground if not fixed into a suitable concrete base due to the uplift created by wind acting on the roof area.
- Do you use Polycarbonate, PETG, GRP or Acrylic for non fabric cladding?
At Clovis Canopies we use polycarbonate roofing as although slightly more expensive, we find it has a better combination of strength, impact resistance, sheet size and colour, fire / flame resistance and longevity of life than any of the other above mentioned cheaper materials.
- How is the polycarbonate sheeting attached to the framework?
We use a two part glazing bar on our canopies with rubber gasket or cushions to attach the roof polycarbonate sheets as this allows for the expansion of the sheets as the weather heats up or cools down. The rubber gaskets as well as creating a watertight seal greatly reduce noise levels as the sheets expand and contract. We do not screw sheets directly to the framework as this can lead to the roofing sheets buckling and potentially causing leaks due to the possibility of screw heads popping off. In addition to this we never lap one sheet over the other as this can result in an algae build-up resulting in unsightly discoloured patches in the roof.
We'd love to hear from you