Wilberforce College – Kingston Walkway Canopy
This is a large 6th form campus with the increased new build. The requirement was to protect students and staff during movements around the college. This was archived with various Kingston walkway canopies. 2m wide x 93m long
- Shape: Curved Barrel Vault
- Support: Free Standing
- Hoop Style: Single Box
- Cladding Type: Polycarbonate
Frequently Asked Questions
- Can we view existing canopies, so that we know what we are buying?
If you are considering purchasing a canopy from any company, it is in fact strongly recommended that you visit an existing installation to see exactly what you are paying for. At Clovis Canopies we are proud of our work and are happy to arrange (with the clients consent) for you to view examples of our work and structures.
- Do you fix your canopies directly onto tarmac?
No, all canopies are fixed on to concrete pads or bases as the structures can lift out from the ground if not fixed into a suitable concrete base due to the uplift created by wind acting on the roof area.
- How is the polycarbonate sheeting attached to the framework?
We use a two part glazing bar on our canopies with rubber gasket or cushions to attach the roof polycarbonate sheets as this allows for the expansion of the sheets as the weather heats up or cools down. The rubber gaskets as well as creating a watertight seal greatly reduce noise levels as the sheets expand and contract. We do not screw sheets directly to the framework as this can lead to the roofing sheets buckling and potentially causing leaks due to the possibility of screw heads popping off. In addition to this we never lap one sheet over the other as this can result in an algae build-up resulting in unsightly discoloured patches in the roof.
- What are Building Regulations and will they affect me?
In relation to our canopies Building Regulations specify the standard to which they should be built i.e. strength, fire rating of materials etc. Again it is advisable to contact your local Building Control officer(s), as a rule of thumb any canopy over 30m2 will require conformity to building regulations and an application will need to be made although this figure can be lower. Most of our structures are supplied conforming to the requirements for these regulations as standard and generic sets of structural calculations can be supplied free of charge to demonstrate to Building Control the integrity of the proposed structure and foundations.
We'd love to hear from you