Why Clovis Canopies?
British made
Made to measure
Up to 25 year framework guarantee & 50 year structural design life
All year round use
After sales service
Contact
Designs
Ascot Barrel Vault Canopy
The Ascot Barrel Vault design uses a single rolled box section for the roof arches giving a clean line to the roof. The barrel format brings the eaves down on either side creating greater protection in open areas. The roof of the canopies can either be clad with flame retardant waterproof PVC fabric or polycarbonate.
Downloads
Specification
- Guarantees: Framework - 25 years | Polycarbonate Cladding - 10 years proportional against discolouration through sunlight | Fabric Cladding - 10 years proportional against premature degradation
- Size: The maximum width for the Ascot is around 7m, but each canopy is fabricated to suit the clients requirements
- Applicable Standards: UKCA Marked structural steel fabricated in accordance with BS EN1090, designed in accordance with BS EN 1990,91,92,93,97 for Wind & Snow Loadings (replaced BS6399 Pt.2 - Wind & Snow Loadings; BS5950 - Structural Use of Steelwork in Buildings)
- Roof Shape: Low Rise Barrel Vault
- Polycarbonate Cladding - Option 1: Flame Retardant (Class 1) Structured Opal (opaque) or Clear Polycarbonate with a 10 year proportional guarantee against discolouration from sunlight
- Polycarbonate Cladding Fixing: Two part Aluminium Glazing Bar with rubber gaskets to allow for thermal expansion of the roofing sheets and secure fixing
- Fabric Caldding - Option 2: Waterproof, Flame Retardant, white PVC coated fabric with a 10 year proportional guarantee against premature degradation. Also available in other non-standard colours
- Fabric Cladding Fixing: The fabric roof cladding sheets are tensioned into, and retained by, our own aluminium cladding retention rail system
- Standard Finish: Shot blast, Beckryzinc primed, and polyester powder coated to any standard BS/RAL Classic colour
- Rainwater Goods: Colour coded Aluminium gutters included as standard to both eaves sides, with downpipes terminating at ground level
- Foundation Fixings: Chemical or cast in-situ anchor bolts into concrete foundation pads typically 800mm square x 600mm deep
Designs
Related Designs
Projects
Example Projects
Blog
Related Articles
FAQs
Frequently Asked Questions
- Will there be any additional hidden charges to the quotation?
-
No, our prices are all inclusive.
- Will our concerns over children and staff safety be addressed prior to installation?
-
We have been working within schools for many years. All contractors are Clovis approved and CRB checked. Full risk assessments are carried out prior to starting installation taking into consideration your requirements and safety fencing is erected wherever needed at no additional charge.
- Will I require planning permission?
-
We always advise that you call your local planning authority as there are no hard and fast rules. They will advise on whether you require planning permission for your proposed canopy. Although it differs from region to region canopies under 30m2 may not require permission but this can be affected by situations such as proximity to neighbours, listed building status, conservation areas etc. so it always best to check. We are happy to provide free of charge, scaled drawings etc. of the proposed canopy structure to assist your application should you require.
- What guarantees are offered?
-
Subject to appropriate cleaning and maintenance we offer the following guarantees:-
- Framework – 25 years against failure within design, wind and snow loadings
- Polycarbonate – 10 years against discolouration from sunlight
- Fabric Cladding – 10 years against degradation / failure from sunlight
We aim for 100% satisfaction 100% of the time.
Want to know more?
We'd love to hear from you
Clovis Canopies is a trading division of Clovis Lande Associates Ltd.
