Designs

Cambridge Cantilever Gull-wing Canopy

The Cambridge Cantilever Gull-wing structure can be used as an entrance canopy or extended to create a covered walkway. Supplied clad with either polycarbonate, or bolted glass, or glass laid into patent glazing bars.

Specification

Guarantees: Framework - 25 years | Polycarbonate Cladding - 10 years proportional against discolouration through sunlight
Size: The maximum width for the Cambridge Cantilever Gull-wing is around 7m, but each canopy is fabricated to suit the clients requirements
Applicable Standards: UKCA Marked structural steel fabricated in accordance with BS EN1090, designed in accordance with BS EN 1990,91,92,93,97 for Wind & Snow Loadings (replaced BS6399 Pt.2 - Wind & Snow Loadings; BS5950 - Structural Use of Steelwork in Buildings)
Roof Shape: Flat Pitched Cantilever Gull-wing
Glass: Toughened laminated safety glass to BS EN 12150
Solid Polycarbonate: Flame Retardant (Class 1) Solid Sheet Clear Polycarbonate with a 10 year proportional guarantee against discolouration from sunlight
Structured Polycarbonate: Flame Retardant (Class 1) Structured Opal (opaque) or Clear Polycarbonate with a 10 year proportional guarantee against discolouration from sunlight
Polycarbonate/Glass Cladding Fixing: Two part Aluminium Glazing Bar with rubber gaskets to allow for thermal expansion of the roofing sheets and secure fixing
Standard Finish: Shot blast, Beckryzinc primed, and polyester powder coated to any standard BS/RAL Classic colour
Rainwater Goods: Colour coded Aluminium gutter included as standard with downpipes terminating at ground level
Foundation Fixings: Chemical or cast in-situ anchor bolts into concrete foundation pads

make an enquiry

Why Clovis Canopies?

British made

Made to measure

Up to 25 year framework guarantee & 50 year structural design life

All year round use

After sales service

Designs

Related Designs

Oxford Cantilever Gull-wing Canopy

The Oxford Cantilever Gull-wing structure is ideally used as a covered walkway, although it can be used as an entrance canopy or waiting shelter. Supplied clad with either a waterproof…

Cambridge Cantilever Gull-wing Canopy

The Cambridge Cantilever Gull-wing structure can be used as an entrance canopy or extended to create a covered walkway. Supplied clad with either polycarbonate, or bolted glass, or glass laid…

Private: Sussex Umbrella Canopy

Modern and stylish, The Sussex tensile fabric Umbrella can be used to enhance any outdoor social space, naturally drawing people in to shelter from the rain when it pours or…

Uxbridge Entrance Canopy

The polycarbonate clad Uxbridge entrance canopy is the most popular standard design of our entrance canopy range. The Uxbridge is supported by two or more columns and is either entirely…

View All Designs

Projects

Example Projects

Romford Hospital – Glass Walkway Canopy

Gullwing design walkway canopy structure. The roof area uses paten type glazing bars allowing for a full depth sheet of glass.

Merton Civic Centre – Entrance Canopy

This bespoke Cambridge Cantilever gull-wing entrance canopy was procured by the local council to add the ‘final flourish’ to the extension and refurbishment of their existing staff entrance area. The…

We are very pleased with how they look and that they will be a ‘boon’ for our children in terms of shade and rain protection. However my main reason for writing is that I am very pleased with the way in which your staff Martin Sears and Timothy Barclay, have carried out the project. The space we used for the canopies is a main thoroughfare to our playgrounds. They have managed to keep this are very tidy and safe throughout the week so that we can function as a school without any inconvenience. This was mainly due to Martin and Timothy, who in addition to doing such a good job have worked exceptionally well, ensuring ‘business as usual’ and have been very friendly with staff and children. They are a credit to your company and I hope that you will let them know that I have followed up my appreciation of them with this letter.

A Long, Headteacher,, Battle Primary

Clovis provides an excellent design service offering 2D and 3D drawing of the proposed canopies and quotation stage if required. This can be especially helpful to illustrate the proposed canopy to the client or Local planning Authority. Clovis will also visit the site if the host building has a complication or the canopy has an unusual configuration. When an order has been placed, service continues to be timely and flexible and the end product has always been delivered and installed on programme and to a very high standard. I have worked with Clovis Canopies for several years and have always found their response to be prompt, helpful an knowledgeable. We test the market value for every canopy that we procure and have found Clovis to be good value. I am often asked to pass on Clovis’s contact details to those who have seen the canopies.

Gawain Ferguson,

I am writing to say how pleased we are with the new canopies which you recently installed at our school. The whole process, from initial visit to completion, was carried out most professionally with minimal disruption to school life. The installation team were courteous and helpful and took great care to ensure that the site was left clear and tidy. We are all delighted with our new facility, which is a massive improvement on what we had before. Thank you once again.

J Jarvis, Headteacher, Boughton Monchelsea Primary

Blog

Cambridge Cantilever Gull-wing Canopy

Specification

Related Articles

Bespoke Canopy Solutions For Schools Seeking Additional Learning Space

Space Saver Case Study